Printronix P3000 Series - Manual (Page 43)

3–7 Configuration
Control Panel Configuration Diagram
The Control Panel Configuration Diagram is a series of block diagrams that show the configuration
menus and the parameters (values) available within each menu. Boxes on the diagram represent the
message area, the message that appears on the display is printed inside the box, and the letters outside
the boxes adjacent to the directional arrows represent control panel switches. When a switch is
pressed, an arrow leads to the displayed result of pressing that switch. The symbols used on the Control
Panel Configuration Diagram are summarized in Figure 3–2.
The diagram is presented in 3 levels, each level illustrating a particular set of parameter menus and
values. The relationships between the three levels are summarized in Figure 3–3.
Level I – Print Format
⋅
Line Spacing
⋅
Print Mode
⋅
Forms Length Set
Level II – Main Configuration Menus
⋅
Character Set
⋅
Application Compatibility
⋅
Paper Format
⋅
Host Interface
⋅
Load Parameters
⋅
Save Parameters
⋅
Diagnostics
Level III – Configuration Menu Parameters
Select Set IBM PC Select Set ECMA–94 Latin 1
Select Set Multinational Select Set DEC Multinational
Printer Protocol Select SFCC
Printer Select 80–9F Hex
Paper Advance Switch Control Code 06
Power On State Control Code 08
Alarm On Fault Overstrike
Unidirectional