Printronix P3000 Series - Manual (Page 124)

Programming 6–38
Extended Character Set
ASCII Hex Decimal
P–Series SO (Shift Out) 0E 14
SFCC SO SFCC 0E SFCC 14
SFCC n SFCC 6E SFCC 110
SFCC 4 SFCC 34 SFCC 52
Serial ESC 4 1B 34 27 52
Purpose Accesses the extended character set in the range A0 to FF hex using codes 20 to 7F
hex.
Comment Used in 7–bit systems as if data bit 8 was set to 1. For example, sending code 20 hex
accesses the symbol at code point A0 hex. If a printable symbol is not available at
the code point, a space is printed.
SFCC 4 is not cancelled by the next paper motion command; all other commands are
cancelled by paper motion.
Refer to the character set charts in Appendix B.