Printronix P3000 Series - Manual (Page 125)

6–39 Programming
Extended Character Set Cancel (Primary Character Set Select)
ASCII Hex Decimal
P–Series SI (Shift In) 0F 15
SFCC SI SFCC 0F SFCC 15
SFCC o SFCC 6F SFCC 111
SFCC 5 SFCC 35 SFCC 53
Serial ESC 5 1B 35 27 35
Purpose Cancels Alternate Character Set as selected by SO, SFCC SO, SFCC n, SFCC 4 and
ESC 4, and selects the Primary Character Set.
Comment Used in 7–bit systems. If data bit 8 is disabled, this control code selects the range as
if data bit 8 is set to 0, and data is printed as characters from 20 to 7F hex.