Printronix P3000 Series - Manual (Page 123)

6–37 Programming
Expanded (Double Wide) Print (One Line Only)
ASCII Hex Decimal
P–Series SFCC k SFCC 6B SFCC 107
Serial SO 0E 14
ESC SO 1B 0E 27 14
Purpose Selects expanded (double wide) print for one line only.
Comment This expanded print control code is a line–by–line print attribute; when the SO, ESC
SO, or SFCC k control code is received, the current line is printed double wide and
automatically reset.
Reset this control code by a paper motion control code (LF, VT, CR, etc.), by the
DC4 (double wide cancel) code, ESC @ (printer reset), CAN or ESC W (double
wide print). When set by SO, double wide print is not cancelled by the Auto Line
Feed configuration.
Example The following sample program illustrates Expanded Print for one line only. Another
example of expanded printing is shown for Expanded (Double Wide) Print, ESC W,
SFCC W on page 6–36.