Installing the main unit, Places to avoid, Rack mounting – Panasonic WJ-SX650 User Manual

Page 21

Advertising
background image

21

Installing the Main Unit

Places to avoid

• Places exposed to direct sunlight or near a source of

heat such as a radiator

• Very dirty and dusty places
• Places subject to strong vibrations
• Near magnetic field sources such as a television or

speakers

• Near high-voltage cables such as a power cable
• Near noise sources such as fluorescent lamps
• Places where condensation forms easily
• Humid places
• Places where drastic temperature changes occur
• Places which are not level
• Steamy and oily places such as kitchens

Rack Mounting

When mounting this unit, use the following racks.
Standard Rack: WU-RS71 (29 units can be mounted.)
Long Rack: WU-RL76 (41 units can be mounted.)
EIA equivalents (Products of other manufacturers): EIA

19 inch rack, 450 mm {17-7/10"} or more depth

Note: When mounting this unit into a rack of another manu-

facturer, Rack Mounting Screw (W2-MSS/5008) (Option)
or M5 x 12 screws (4 pcs.) are required. If you use the
supplied rack mounting screws (nominal diameter 5
tapping), the screw heads may be damaged.

1. Power off the unit.

2. Remove the rubber feet (4 psc.) on the bottom of the

unit by loosening the screws.

3. Mount the unit into the rack by fixing the rack mounting

screws (locally procured: 8 pcs). (Refer to the following
illustration.)

Important:

• If the rack is subject to vibration, secure the rear of the

unit to the rack by using additional mounting brackets
(locally procured).

• To avoid loosening, secure the mounting screws surely.
• When operating the units, keep the temperature inside

the rack surely below 45 °C {113 °F}.

• Mount the unit into the rack with a space equivalent to

approx. 1 unit (44 mm) or more to separate from other
devices.

• Mounting ventilation fan(s) in the rack is recommended

especially when the rack is covered with front lids.

• To prevent the unit from overheating, do not block the

ventilation openings or slots in the cover

Remove the rubber feet.

Matrix Switcher WJ-SX

650

Matrix Switcher WJ-SX

650

Matrix Switcher WJ-SX

650

Make a space equivalent to

approx. 1 unit (44 mm) or more

EIA 19 inch rack

Advertising