Panasonic WJ-SX650 - Manual (Page 65)

65
■ Sequence Pause
You can pause an active tour or group sequence. When a
group sequence is paused on a monitor, all sequences will
be simultaneously paused on other monitors.
1. Press the SEQ PAUSE (or PAUSE) button.
Sequence will be paused.
2. Press the SEQ PAUSE (or PAUSE) button again to
restart the sequence.
Available operations during sequence pause
• Sequence step forward/backward
You can move the sequence one frame to the next or
previous step by pressing the + or – button.
• Camera control
You can control the camera whose image is being dis-
played on the monitor.
■ Sequence Stop
When a tour or group sequence is stopped, the camera at
the stopped step will be selected. When a group sequence
is stopped on a monitor, all sequences will be simultane-
ously stopped on other monitors.
● WV-CU950/650
Press the SEQ STOP button while holding down the SHIFT
button.
Sequence will be stopped.
● WV-CU360C/CJ
Press the STOP button.
Sequence will be stopped.
● Notes:
Sequence will also be stopped when you select a camera
during the sequence is activated. Then, the image of
selected camera will be displayed on the monitor.