Panasonic WJ-SX650 - Manual (Page 77)

77
Programs the preset position. Enter the number. (Numeric
buttons)
→ [SHIFT] + [PGM PRESET] Enter the number. (Numeric
buttons)
→ [SHIFT] +
[PROGRAM PRESET]
Moves to the preset position. Enter the number. (Numeric
buttons)
→ [PRESET]
Enter the number. (Numeric
buttons)
→ [CALL PRESET]
WV-CU950/650, WV-
CU360C/CJ:
Without numeric entry, the
camera will move to the home
position.
Camera setup menu Open "Camera Setup" menu.
→ WV-CU950/650, WV-
CU360C/CJ:
• Refer to p.
36 Operation list
of WV-CU950/650 and WV-
CU360C/CJ for setup menu
operations.
• Moves the cursor: Joystick
CDAB
• To perform the setting of
panning/tilting, lens iris, lens
focus, or zooming in the
setup menu, control the
camera while holding down
the SHIFT button.
• Opens the camera setup
menu
• Closes the camera setup
menu
[F2] [SHIFT] + [CAM SETUP]
<In the camera setup menu>
• Opens the special menu. /
Resets the camera setting.
• Resets all the camera set-
tings.
[F3]
[F4]
[RESET]
[SHIFT] + [ALL RESET]
Pan/Tilt control Joystick CDAB Joystick CDAB WV-CU950/650, WV-
CU360C/CJ:
The camera will pan and tilt
according to the direction of
joystick movement.
WV-CU950/650, WV-
CU360C/CJ:
Lens iris will keep opening up
while this button is held down. Iris control
• Opens the lens iris.
[IRIS OPEN] [IRIS OPEN]
[F1] [SHIFT] + [CAM SETUP]
• Closes the lens iris. [IRIS CLOSE] [IRIS CLOSE] WV-CU950/650, WV-
CU360C/CJ:
Lens iris will keep closing
down while this button is held
down.
• Resets the lens iris to the
default status.
[A] [IRIS OPEN] + [IRIS CLOSE] WV-CU950/650:
You can assign another func-
tion to this button.
The setting is performed in
"Controller" – "Key
Assignment" of WJ-SX650
Series Administrator Console.
Function WV-CU950/650 WV-CU360C/CJ Note
Camera control