Panasonic WJ-SX650 - Manual (Page 70)

70
T01 to 32: Tour Sequence 1 to 32 was activated.
G01 to 32: Group sequence (or Group preset) 1 to 32
was activated.
Notes:
• User ID and Controller No. is displayed for an alarm
reset or suspended by an operator. (They are not
displayed for auto reset.)
• User ID and controller No. will be highlighted to
indicate alarm reset or alarm suspension OFF.
• REC
"Recording Source (LCN)" associated with the alarm event
is displayed.
Refer to p. 36 Lists of Functions and Operations for opera-
tions while the Alarm History Display is displayed on the
monitor.