Schedule, Alarm, Operator – Panasonic WJ-SX650 User Manual
Page 46
46
Item
Tour Sequence 7: Images of LCN 193 to 224 are sequen-
tially switched for two seconds.
Tour Sequence 8: Images of LCN 225 to 256 are sequen-
tially switched for two seconds.
Tour Sequence 9 to 32: No settings
"Group Sequence"
Group Sequence 1: 4 cameras among LCN 1 to 64 are
sequentially switched for 2 seconds on Monitor 1 to 4.
Group Sequence 2: 4 cameras among LCN 65 to 128 are
sequentially switched for 2 seconds on Monitor 5 to 8.
Group Sequence 3: 8 cameras among LCN129 to 256 are
sequentially switched for 2 seconds on Monitor 9 to 16.
Group Sequence 4 to 8: No settings
Group Sequence 9: Spot image of LCN 1 to 16 are dis-
played on Monitor 1 to 16.
Group Sequence 10 to 32: No settings
● Schedule
"Timer Event"
No settings
"Camera Event"
No settings
● Alarm
"Alarm Mode"
Alarm Mode: Sequence* (Dwell Time: 2 sec*)
Auto Reset: 30 sec*
Terminal Alarm: ON (All alarms are N.O.)*
Camera Alarm: OFF*
Recorder Alarm: OFF*
Serial Alarm: OFF*
Video Loss: OFF*
"Alarm Event"
Terminal Alarm 1 to 256: SPOT, LCN 1 to 256, Monitor 1
Camera Alarm 1 to 256:
No settings
Recorder Alarm 1 to 256:
No settings
Video Loss 1 to 256: Monitor 4 (No events)
Serial Alarm 1 to 1024: No settings
"Monitor Display Mode"
"Alarm Schedule"
No settings
● Operator
"Operator"
Note: Refer to p.
19
Operator Registration.
PS·Data: User ID: 650
HDR Network Operation: Priority: 1
Monitor
1 to 16
17 to 24
25 to 32
Display Mode
Spot
Tour Sequence
Group Sequence
"Level Table"
System
OSD Control
Level 1
Enabled
(Checked)
Enabled
Enabled
Disabled
Disabled
Disabled
Alarm History Display
Enabled
Enabled
Disabled
Disabled
Disabled
System Status Display
Enabled
Disabled
Disabled
Disabled
Disabled
Alarm Suspension
Enabled
Disabled
Disabled
Disabled
Disabled
Alarm All reset
reset
Enabled
Enabled
Disabled
Disabled
Disabled
Alarm ACK, Alarm Individual/
Monitor Reset
Enabled
Enabled
Enabled
Disabled
Disabled
Start Tour Sequence
Enabled
Enabled
Enabled
Enabled
Disabled
Start Group Sequence
Enabled
Enabled
Enabled
Enabled
Disabled
Monitor Lock
Enabled
Enabled
Disabled
Disabled
Disabled
Camera Setup
Preset Position Registration
Enabled
Enabled
Enabled
Disabled
Disabled
Disabled
All Cameras Control
Enabled
Enabled
Disabled
Disabled
Disabled
Camera Control
Enabled
Enabled
Enabled
Disabled
Disabled
Camera Selection
Enabled
Enabled
Enabled
Enabled
Disabled
Recorder Setup
Enabled
Disabled
Disabled
Disabled
Disabled
Recorder Control
Enabled
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Level 2
Level 3
Level 4
Level 5
Disabled
(Not checked)
Disabled
Disabled
Disabled