Panasonic WJ-SX650 - Manual (Page 61)

61
● WV-CU360C/CJ
This operation is not available.
■ Recorder Control End
Before this operation, stop playback or search playback
surely.
To finish recorder control, select a camera.
The monitor display will become the status before recorder
control.
■ Recorder Selection
Before recorder control procedures not described in this
chapter, you need to select a recorder in advance. In the
following example, you will open SETUP MENU of Recorder
16.
● WV-CU950/650
1. Enter the desired recorder number by pressing the
numeric buttons. The entered number will appear on
the LCD.
2. Press the RECORDER button. The recorder will be
selected.
3. Press the MENU button repeatedly until "System Setup"
appears on the LCD.
4. Press the F1 button. SETUP MENU of recorder will be
displayed on the selected monitor.
Note: To close the SETUP MENU, press the F2 button.
● WV-CU360C/CJ
1. Enter the desired recorder number by pressing the
numeric buttons. The entered number will appear on
the LCD.
2. Press the RECORDER button. The recorder will be
selected.
3. Press the SETUP button while holding down the SHIFT
button. SETUP MENU of recorder will be displayed on
the selected monitor.
Notes:
• To close the SETUP MENU, press the F2 button.
• If a selected recorder directly connects an external
monitor, black screen will be displayed on the monitor
with the message "RECORDER CONTROL". Refer to p.
64 for connection.