Panasonic WJ-SX650 - Manual (Page 73)

73
This chapter includes operation list, function list, and function menu flow of the terminal mode. Operators can be given restrict
levels for each operation and function according to the user level settings.
■ Lists of Operations and Functions
• [q] means the q button.
• "q + w" means pressing the q and w buttons at a time.
• " q
→ w " means performing q before w.
• Refer to p. 47 Menu Flow (WV-CU950/650) for how to recall menu functions.
• "CDAB" means the directions to move the joystick.
Operation list of WV-CU950/650 and WV-CU360C/CJ
TERMINAL MODE OPERATION
Alarm recover
Moves the cursor. Joystick CDAB Joystick CDAB
• Determines the selected
parameter.
• Moves to the sub menu of
SETUP MENU.
• Cancels the selection.
• Returns to the upper menu.
• Closes the search list. [MON (ESC)] [MON (ESC)]
Returns the LCD to the default
status. [MON (ESC)] Not available (No LCD on this
system controller) WV-CU950/650:
Exit SETUP MENU before this
operation. (Pressing the EXIT
button can close SETUP
MENU along with this opera-
tion.)
Moves to the next page. • Shuttle ring clockwise
• Zoom wheel controller to the
right
Not available WV-CU950/650:
You can also move to the next
page by moving the cursor to
the edge.
Moves to the previous page. • Shuttle ring counterclock-
wise
• Zoom wheel controller to the
left
Not available WV-CU950/650:
You can also move to the pre-
vious page by moving the
cursor to the edge.
Changes the selected para-
meter. • [+] or [–]
• JogDial clockwise or coun-
terclockwise
[NEXT] or [PREV]
Enters numeric parameters. Numeric buttons Numeric buttons
Clears an entry such as a
password. [CLEAR] [CLEAR]
Note: Details may differ depending on the function to activate. Along with this list, refer to the operating instructions of system
controller.
[CAM (SET)] or top button [CAM (SET)]
WV-CU950/650 WV-CU360C/CJ Note