Panasonic WJ-SX650 - Manual (Page 49)

49
■ TIME & DATE
You will set the current time and date.
When you select TIME & DATE on the top menu, the follow-
ing menu is displayed.
Note: Display format setting is performed in "Display" –
"Display" of WJ-SX650 Series Administrator Console.
• Year
2005 to 2099
• Month
1 to 12 (When Date Format is set to DD/MM/YYYY,
MM/DD/YYYY, YYYY/MM/DDDD in WJ-SX650 Series
Administrator Console)
Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec
(When Date Format is set to DD/Mmm/YYYY or
Mmm/DD/YYYY in WJ-SX650 Series Administrator Console)
• Day
1 to 31
• Time
0 to 23(When Time Format is set to 24-h in WJ-SX650
Series Administrator Console)
1 to 12(When Time Format is set to 12-h in WJ-SX650
Series Administrator Console)
AM /PM (When Time Format is set to 12-h in WJ-SX650
Series Administrator Console)
• Minute
0 to 59
• DST/SUMMER TIME
ON/OFF
The factory default is as follows.
Jan/01/2005 00:00AM, DST/SUMMER TIME ON
Note: When DST/SUMMER TIME is set to ON, the daylight
saving time (summer time) is activated during the spec-
ified period. ("
∗" is displayed beside the time.) The peri-
od setting is performed in "Display" – "DST/Summer
Time" of WJ-SX650 Series Administrator Console.
■ ALARM
You will perform the settings of alarms (terminal alarms,
camera alarms, recorder alarms, serial alarms, and video
loss).
When you select ALARM on the top menu, the following
menu is displayed.
● ALARM Menu
• ALARM MODE
Select the display pattern to display spot alarm pictures on
the associated monitors. (The factory default is
SEQUENCE.)
SEQUENCE: Alarm pictures are sequentially displayed on
the associated monitor. Select desired DWELL TIME
from 1 to 30 sec. (The factory default is 2 sec.)
LATEST: The latest alarm picture is displayed on the moni-
tor.
EARLIEST: The earliest alarm picture is displayed on the
monitor.
• AUTO RESET
Select the period until an alarm is automatically reset. If you
select OFF, you will reset the alarm manually. (The factory
default is 30 sec.)
OFF/1, 2... to 10 sec/20 sec/30 sec/1 min/3 min/5 min
• TERMINAL ALARM
Select ON or OFF to accept or not accept terminal alarm
input signals.
ON: Accepts terminal alarm input signals.
OFF: Not accepts terminal alarm input signals.
Note: If you select ON, you can move to TERMINAL
ALARM (refer to p. 85 ), and you can set the details on
terminal alarm input signal.
• CAMERA ALARM
Select ON or OFF to accept or not accept camera alarm
input signals.
ON: Accepts camera alarm input signals.
OFF: Not accepts camera alarm input signals.
100 TIME&DATE
Aug/31/2005 ∗08:15 PM
DST/SUMMER TIME ON
B
300 ALARM
310 ALARM MODE SEQUENCE
DWELL TIME 2sec
320 AUTO RESET OFF
330 TERMINAL ALARM ON
O
340 CAMERA ALARM OFF
350 RECORDER ALARM OFF
360 SERIAL ALARM ON
370 VIDEO LOSS ON