Midi setup] area, Gen. rx button – Panasonic WR-DA7 User Manual
Page 157
C h a p t e r 1 1
D A 7 U s e r s ’ G u i d e
11
-
3
11
MIDI
[MIDI SETUP] Area
Here, the direction of messages (serial data) coming from and going to
MIDI
IN, MIDI OUT, and TO PC is set. Select one of these four combinations to
set the direction of data:
Status 1: When
is set to
and
is set to
, the DA7
cannot communicate with the personal computer. Data can be
transmitted and received between the DA7 and a MIDI device. A
message is input from the MIDI device to the
MIDI IN terminal, while
the DA7 outputs a message to the MIDI device from its
MIDI OUT
terminal.
Status 2: When
is set to
and
is set to
, the
DA7 can receive messages from the MIDI device and transmit messages
to the personal computer. The personal computer and the MIDI device
can communicate with each other via the DA7.
Status 3: When
is set to
and
is set to
, the
DA7 can receive messages from the personal computer and transmit
messages to
MIDI OUT.
Status 4: When
is set to
and
is set to
, the
DA7 can communicate only with the personal computer.
Button
Set the
MIDI input port by pressing the ENTER button. Rotate the JogDial
to set
. Cursor to
on the
line, and press the
ENTER
button to display either
or
.
Cursor to
on the
line, and rotate the
JogDial to display one of the
channels, 1 through 16 and omni [OM] for the DA7. The DA7 is controlled
by a message from the selected port, either
[MIDI] or [ToPC].
MIDI SETUP Area
1
2
4
3