Panasonic WR-DA7 - Manual (Page 201)

D A 7 U s e r s ’ G u i d e 14 - 1
14
Automation
The automation function synchronizes the DA7 to a timing signal, and
records and plays back mixes. You can set it to synchronize to a Timecode
input from outside the DA7, such as MIDI Timecode, MIDI clock, and
SMPTE.
The parameters for automation that can be controlled by the system are EQ
parameters, dynamics can be turned on or off, channel on and off, fader
changes, panning, surround sound, aux send, balance, scene memories can
be recalled, as well as CH, EQ, and Dynamics Libraries.
The AUTOMATION button is one of the display control buttons in the
SETUP section of the Top Panel. Press the AUTOMATION button to display
the most recently selected window for the window group.
The [AUTOMATION] window group selections are [SETUP], [EXECUTE],
and [EVT EDIT] (event edit).
Chapter 14
Automation
SOLO
MONITOR UTILITY MIDI D-I/O
GROUP AUTOMATION
SET UP
SETUP Section
AUTOMATION button
13