Mute grp] area, Equalizer] area – Panasonic WR-DA7 User Manual
Page 89
C h a p t e r 5
D A 7 U s e r s ’ G u i d e
5
-
7
5
Channels,
Library
, & Meters
[MUTE GRP] Area
A mute group is similar to a fader group. When a fader is assigned to an
already activated mute group, pressing the
ON LED button of the current
Channel Strip will affect the on and off status of all channels in that group.
To assign the current channel to a mute group, cursor to one of the mute
group
choices, , , ,
or ,
and press the
ENTER button.
To activate a mute group, change to the
[GROUP>MUTE GRP] window,
cursor to the group number status line in the
[MUTE GRP] window, and
press the
ENTER button.
See Chapter 13, Group for more information.
[EQUALIZER] Area
The
[EQUALIZER] area is displayed when you select a channel that supports
equalization. The equalizer graph reflects the equalizer characteristics that
you have set in the four-band parametric EQ, accessed by pressing the
[H],
[HM], [LM], or [L] buttons in the EQUALIZER section, and turning the
[Q], [FREQ], or [GAIN] knobs.
To activate the channel equalizer, cursor to the
button, and press the
ENTER button. The
button will toggle to
.
Alternatively, pressing the
EQ ON LED button in the EQUALIZER section
switches the equalizer for a selected channel off and on.
To view the
[EQUALIZER] window, cursor to the equalizer graph displayed,
and press the
ENTER button. The LCD switches to the [EQUALIZER]
window for the selected channel. Or, you can reach the
[EQUALIZER]
window by pressing the GAIN
knob in the
EQ section on the Top Panel.
When the
[AUTO DISP CHANGE] selection in the [UTILITY>CONFIG]
window is
, you can also display the
[EQUALIZER] window by either
pressing one of the LED buttons or by adjusting one of the knobs in the
EQUALIZER section.
See Chapter 7 for more information on the
EQUALIZER section.
ON
SUB
ON
OFF
OFF
4
3
2
1
[EQUALIZER] Area