Panasonic WR-DA7 - Manual (Page 88)

The soft knob in the [PAN/BAL] area of the [CHANNEL] window controls
the balance for the paired channels. When the stereo setting is switched off,
the balance value returns to pan value, but the bus assignment status, if any,
does not change.
Gain Reduction Meter [GR] Area
The [GR] meter is displayed when you select a channel that
supports dynamics.
See Chapter 9, Dynamics/Delay for more on gain reduction
metering.
[LEVEL] Area
The level meter indicates the outgoing level of the selected channel
to the
MASTER L/R output. When in stereo mode, left and right
level meters are displayed.
The range of the level meter is -50 to OL (overload).
[FADR GRP] Area
The [FADR GRP] (fader group) lets you tie a selected group of faders
together. Operating one fader affects all the other channels in that group. To
assign the current channel to a group, cursor to
the , , , or button,
and press the ENTER button.
To activate a fader group, select the [GROUP>FADR GRP] window, cursor to
the group number status line in the [FADR GRP] window, and press the
ENTER button.
Once you have grouped several faders, move one and see how it controls the
others. When a fader in the
[FADR GRP] is selected, all other fader group
conditions are canceled.
See Chapter 13, Group for additional information.
4 3 2 1
C h a p t e r 5
D A 7 U s e r s ’ G u i d e 5 - 6
5
Channels,
Library
,
&Meters
Remember that the digital format is very unforgiving of
overmodulation. Too high a level will create noise and distortion
in the recording process.