Panasonic WR-DA7 - Manual (Page 243)

C h a p t e r 1 6
D A 7 U s e r s ’ G u i d e 16 - 1 3
16
Utility
16-4 Utility, User Custom (USER CSTM) Window
This window allows you to program which sources will be controlled by the
16 channels in the
CUSTOM/MIDI Fader Layer.
The [FADER LAYER CUSTOMIZE ASSIGN TABLE] lets you assign sources
to the channels. The [ASSIGN CH] (assign channel) selection can be any
source: inputs 1 through 32, aux returns 1 through 6, buses 1 through 8, and
aux sends 1 through 6. Cursor to the channel number that you want to
change, and rotate the
JogDial to select the desired source.
At the bottom of the channel assignment columns there is a
button. When selected, it changes to inverse video. When active, the columns
will change from [ASSIGN CH] information to [MIDI CH#]. Each of these
can be programmed to the desired MIDI channel selection and can be
assigned to MIDI message in the
[MIDI > MIDI RMT] window. When selected,
MIDI messages are reflected to SOLO, ON, PAN and FADER functions of
respective channels in the [MIDI > MIDI RMT] window.
Cursor to the button, and press the ENTER button to activate the
selections for use as the CUSTOM/MIDI Fader Layer assignments.
For more information, see Chapter 11, MIDI.
USER CSTM Window