Panasonic WR-DA7 - Manual (Page 214)

14-3 AUTOMATION, EVT EDIT (Event Edit) Window
Use the [EVT EDIT] window to change parameters of events in the
automation by changing them in an "off-line" method. In other words, you
can make a simple change to an event (single or multiple channels) by
entering in new data instead of doing another mix. A good example would
be if you wish to change a fade. Simply select the fader or faders, and enter a
new time in the data area. It will automatically update the mix.
[EDIT CHANNEL SELECT] Area
Channels can be edited individually for [INPUT 1-32], [AUX RTN 1-6], [AUX
SND 1-6], [BUS 1-8], and [MASTER L/R]. To edit the channels collectively,
cursor to
, and press the ENTER button. All of the edit parameters
will then appear as inverse video. To disable all the parameters, cursor to the
button, and press the ENTER button.
If you wish to edit individual channels, cursor to the channel (or channels)
you wish to select, and press the
ENTER button to select them.
C h a p t e r 1 4
D A 7 U s e r s ’ G u i d e 14 - 1 4
14
Automation
EVT EDIT Window
EDIT CHANNEL SELECT Area