Mon a] area, Surround monitor] area – Panasonic WR-DA7 User Manual
Page 233
C h a p t e r 1 6
D A 7 U s e r s ’ G u i d e
16
-
3
16
Utility
[MON A] Area
Engaging the
[MON A]
button lowers the volume of the
MONITOR A
system by 20dB, regardless of Talk Back operations. To toggle the
[MON A]
DIM button while the button is not displayed on the LCD, from the
TopPanel press and hold the MMC/CURSOR button, at the same time press
the
SOLO/MONITOR button.
If the
[MON A]
button is off, the monitor volume will be lowered by
20dB whenever the
TALKBACK button on the Top Panel is on. The
monitor volume will be restored when the
TALKBACK button is turned off.
[SURROUND MONITOR] Area
The surround monitor feature is toggled
or
in this area of the
window. The
button toggles with a
button, which determines the
assignment for the surround bus monitor outputs. Cursor to the
button,
and press the
ENTER button to toggle to the
button. The surround bus
assignments are reflected in the table below, as determined by the current
selection.
The outgoing
[MASTER LEVEL] of the surround sound feature is also set in
this area of the window. The soft knob controls the level for the surround
sound monitoring system. The knob has a range of -
∞
to +10dB. Cursor to
the
[MASTER LEVEL] soft knob, and rotate the JogDial to raise or lower
the surround monitor output level. To control the
[MASTER LEVEL] knob
while that soft knob is not displayed on the
LCD, from the TopPanel, rotate
the
Level ON/OFF knob in the AUX section, when the individual channel
surround screen is displayed.
See Chapter 8, Pan/Assign, Surround, Bus Assign for further information.
MON
MON
ON
OFF
SURROUND MONITOR Area
MON
Surround
bus 1 (L)
Mon A (L)
Mon A (L)
Surround
bus 2 (R)
Mon A (R)
Mon A (R)
Surround
bus 3 (C)
Aux send 3
Mon B (L)
Surround
bus 4 (SW)
Aux send 4
Mon B (R)
Surround
bus 5 (SL)
Aux send 5
Master L
Surround
bus 6 (SR)
Aux send 6
Master R
MON A Area