Panasonic WR-DA7 - Manual (Page 202)

14-1 AUTOMATION, SETUP Window
Use the [SETUP] window to set up the automation and to store or recall
library automation events.
[MANUAL CHANNEL SELECT] Area
This area permits you to select [INPUT 1-32], [AUX RTN1-6], [AUX SND 1-
6], [BUS 1-8], or [MASTER L/R] as manual channels. When selected as a
manual channel, the selected fader is not recorded. These buttons can only
be selected by highlighting them with the
JogDial, and pressing the ENTER
button.
Once you have selected a channel here, remember that it is no longer part of
the recorded automation information for the current mix and will not record
or playback any automation function.
Button
Choosing assigns all the channels to the safety of manual
control.
Button
When is selected, all channels transmit and receive automation
data.
C h a p t e r 1 4
D A 7 U s e r s ’ G u i d e 14 - 2
14
Automation
SETUP Window
MANUAL CHANNEL SELECT Area