Setup menus, Menu, Connections with dolby-e* components – Panasonic HD1700pe User Manual

Page 104

Advertising
background image

104

Setup menus

The underlining (__) denotes the factory setting mode.

<MENU>

No./Item

Description of setting

A02

P. ON LOAD

This VTR is equipped with VTR MEMORY
for storing the current settings (*

1

) and VTR

MEMORY

to

for backing up VTR

MEMORY

. The data of a selected VTR

MEMORY

to

can be loaded into VTR

MEMORY

and operation started on the

basis of this data when the power is turned
on.

0000

OFF:

Operation is started using the previous
settings.

0001

USER1:

The VTR MEMORY

data is loaded and

operation started on the basis of this data.

0002

USER2:

The VTR MEMORY

data is loaded and

operation started on the basis of this data.

0003

USER3:

The VTR MEMORY

data is loaded and

operation started on the basis of this data.

0004

USER4:

The VTR MEMORY

data is loaded and

operation started on the basis of this data.

4

3

2

1

C

4

1

C

4

1

C

*1: The term “settings” here denotes all the settings of the setup

menus, what is registered in the PF1/PF2 menus, and the
contents of some of the function buttons.

<Connections with Dolby-E* components>

When the VTR is to be connected to a Dolby-E encoder/decoder for recording or playing back Dolby-E data, set
the audio input and output levels to UNITY, and select the following setup menu item settings.

<Notes>
• Dolby-E data cannot be recorded or played back in

the 60 Hz mode.

• Adjust the timing with the video signals to cover the

time taken by the Dolby-E component for
encoding/decoding outside the VTR.

• Set the bit depth of the Dolby-E encoder/decoder to

16 bits.

• Noise will be output from the ANALOG AUDIO OUT

connectors of the channels through which the
Dolby-E data is passing.

• The audio level meter will deflect beyond the range

of its markings for those channels through which
the Dolby-E data is passing.

• Noise will be output when a tape on which Dolby-E

data has been recorded is played back in the JOG
or VAR mode.

* Dolby and the Double D symbol Î are trademarks of

Dolby Laboratories Licensing Corporation.

No.303 AUD EDIT IN = CUT
No.304 AUD EDIT OUT = CUT
No.725 REC CH1 = CH1
No.726 REC CH2 = CH2
No.727 REC CH3 = CH3
No.728 REC CH4 = CH4
No.729 REC CH5 = CH5
No.730 REC CH6 = CH6
No.731 REC CH7 = CH7
No.732 REC CH8 = CH8
No.734 PB FADE = CUT
No.758 JOG PROC = OFF
No.762 AUD RATE CON = OFF

Advertising