Panasonic HD1700pe - Manual (Page 74)

74
Function menus
Special IN menu list (continued)
Special OUT menu list
No.
SUPER
DISPLAY
Description of setting
B22
UD FIT_V For switching the picture angle during down-conversion to
letter box and the picture angle during up-conversion to the
top/bottom cut status in the vertical direction.
B23
UD FIT_H For switching the picture angle during down-
conversion to the side cut mode and the picture angle
during up-conversion to the side panel mode.
B24
UD FIT_HV For switching the picture angle during down-
conversion to the squeeze mode and the picture
angle during up-conversion to the stretch mode.
UPCON MODE and DOWNCON MODE settings switched simultaneously
No.
SUPER
DISPLAY
Description of setting
C00
EJECT EJECT status
C01
STBY ON STANDBY ON status
C02
CUE CUE-UP completed status
C03
STILL STILL status
C04
PANEL STOP Status in which the front panel STOP button is
pressed down
C05
PRE CTL Status of whether to inhibit overwrite during
normal recording
C06
422 REM ON 9-pin connector function status
C07
REMOTE 50-pin connector function status
C08
REC INH1 Recording inhibit status 1
C09
REC INH2 Recording inhibit status 2
C10
CAS INH1 Tape recording inhibit status 1
C11
CAS INH2 Tape recording inhibit status 2
C12
TC SRC1 TC input status 1
No.
SUPER
DISPLAY
Description of setting
C16
DC3 Down-conversion status 3
C17
UC1 Up-conversion status 1
C18
UC2 Up-conversion status 2
C19
UD1 Up-conversion/down-conversion status 1
C20
UD2 Up-conversion/down-conversion status 2
C21
UD3 Up-conversion/down-conversion status 3
C22
ERR0 Error status 0
C23
ERR1 Error status 1
C24
ERR2 Error status 2
C26
CH GREEN Channel condition green LED
C27
CH AMBER Channel condition amber LED
C28
CH RED Channel condition red LED
C29
SERVO LOCK Servo lock LED
C30
V UNITY Video UNITY LED
C31
A UNITY Audio UNITY LED
<50P IN/OUT ASSIGN>
C13
TC SRC2 TC input status 2
C14
DC1 Down-conversion status 1
C15
DC2 Down-conversion status 2