Panasonic HD1700pe - Manual (Page 89)

89
Setup menus
The underlining (__) denotes the factory setting mode.
<EDIT> (continued)
No./Item Description of setting No./Item Description of setting
324* 1
EDIT RPLCEC
As with setup menu item No.320, the VTR’s
CUE edit presets are set to ON or OFF
following the analog audio signals specified
by the editor or controller.
0000 N-DEF:
Not set.
0001 CH1:
The analog CH1 edit presets are followed.
0002 CH2:
The analog CH2 edit presets are followed.
0003 CH1+2:
The analog CH1 or CH2 edit presets are
followed.
320* 1
EDIT RPLCE1
For setting the allocation of the channels for
the analog audio presets of a controller when
a controller without a function to control the
edit presets of the digital audio signals is
used to edit the digital audio signals of the
VTR.
The VTR’s CH1 edit presets are set to ON or
OFF following the analog audio signals specified
by the controller.
0000 N-DEF:
Not set.
0001 CH1:
The analog CH1 edit presets are followed.
0002 CH2:
The analog CH2 edit presets are followed.
0003 CH1+2:
The analog CH1 or CH2 edit presets are
followed.
321* 1
EDIT RPLCE2
As with setup menu item No.320, the VTR’s
CH2 edit presets are set to ON or OFF
following the analog audio signals specified
by the controller.
0000 N-DEF:
Not set.
0001 CH1:
The analog CH1 edit presets are followed.
0002 CH2:
The analog CH2 edit presets are followed
0003 CH1+2:
The analog CH1 or CH2 edit presets are
followed.
322* 1
EDIT RPLCE3
As with setup menu item No.320, the VTR’s
CH3 edit presets are set to ON or OFF
following the analog audio signals specified
by the controller.
0000 N-DEF:
Not set.
0001 CH1:
The analog CH1 edit presets are followed.
0002 CH2:
The analog CH2 edit presets are followed
0003 CH1+2:
The analog CH1 or CH2 edit presets are
followed.
323* 1
EDIT RPLCE4
As with setup menu item No.320, the VTR’s
CH4 edit presets are set to ON or OFF
following the analog audio signals specified
by the controller.
0000 N-DEF:
Not set.
0001 CH1:
The analog CH1 edit presets are followed.
0002 CH2:
The analog CH2 edit presets are followed.
0003 CH1+2:
The analog CH1 or CH2 edit presets are
followed.
*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or
SD) mode has been selected as the system menu item No.25
(SYSTEM FREQ) setting.