Panasonic HD1700pe - Manual (Page 54)

54
Function menus
<CUE>
*The underlining (__) denotes the factory setting mode.
Function
button/item
Switching
method
Corresponding setup
menu item
F1
PREV Press ___
Description of setting
For multi-cue page forward scrolling.
Setting
___
F2
NEXT Press ___ For multi-cue page reverse scrolling. ___
F4
CLR Press ___ For clearing the currently selected cue data.
ENTRY must be selected as the F3 (MODE) setting. ___
F5
AL CLR FiPress ___ When MANU is selected by SHIFT + F3 (PAGE): All the cue
data on the currently displayed page is cleared.
When AUTO is selected by SHIFT + F3 (PAGE): All the cue
data on all the pages is cleared. ___
F3
MODE Toggle ___ For selecting the search or cue point registration mode. SEARCH
ENTRY
F2 (SHIFT)
CARD FiPress ___ For calling the MULTI CUE file operation menu. ___
F3 (SHIFT)
PAGE Toggle No. 131
PAGE MODE
Refer to the setup menu. MANU
AUTO
F4 (SHIFT)
ROTATE Toggle No. 132
ROTA MODE
Refer to the setup menu. OFF
ON
F5 (SHIFT)
CU-ROL Toggle i
ADJ
No. 011
CU-ROLL TIME
Refer to the setup menu. 0s --- 5s ---
15s
F6
___ ___ ___ ___ ___
F6 (SHIFT)
___ ___ ___ ___ ___
$ Clearing individual registered points
When the (CLR) button on the <CUE> menu is
pressed, the currently selected cue point data is
cleared.
* The point is cleared only when “ENTRY” (cue point
registration mode) is selected as the setting for ]
(MODE) on the <CUE> menu.
Search operations
Turn the ADJUST dial to highlight the desired
registered point.
When the PREROLL button is pressed, the preroll
operation is initiated. The tape will not be prerolled if
no cue points have been registered.
Since the tape is not prerolled even if the PREROLL
button is pressed when the cue point registration
mode is established, be absolutely sure to check that
the search mode is established.
(The time selected by the <CUE SHIFT> menu
[
(CU-ROL) setting, which is different from the normal
preroll time, takes effect as the preroll time in this
mode.)
F5
F3
F4
Clearing registered points
$ Clearing all the registered points together
When (AL CLR) on the <CUE> menu is pressed
while the button is held down, all the cue point data
currently selected is cleared. The range of the points
which are cleared is as follows depending on the
setting for
(PAGE) on the <CUE SHIFT> menu.
When “MANU” is set:
All the points on the currently selected page are
cleared.
When “AUTO” is set:
All the points on all the pages are cleared.
After clearing, the search and registered points
appear as follows depending on the setting for
(PAGE) on the <CUE SHIFT> menu.
When “MANU” is set:
A return is made to the top (CUE¢1) of the page
concerned.
When “AUTO” is set:
A return is made automatically to the top (CUE01) of
the first page.
* Points are cleared whether “ENTRY” (cue point
registration mode) or “SEARCH” (search mode) is selected
as the setting for
[ ] (MODE) on the <CUE> menu. F3
F3
F3
F
F5
* This item is not displayed when the 23/24 Hz or 25 Hz (HD or
SD) mode has been selected as the system menu item No.25
(SYSTEM FREQ) setting.