Audio split editing – Panasonic HD1700pe User Manual

Page 35

Advertising
background image

35

Audio Split Editing

Duration display

The duration can be indicated on the display.
Between the video IN and OUT points:
Press the IN button and OUT button at the same
time.
Between the audio IN and OUT points:
Press the A-IN button and A-OUT button at the
same time.

Match frame processing function
When two VTRs are used to perform the audio split
editing operations, there will be a total of 8 edit
points: the video IN and OUT points for the player,
the video IN and OUT points for the recorder, the
audio IN and OUT points for the player, and the
audio IN and OUT points for the recorder.
When five of the eight edit points are registered, the
remaining three points are automatically calculated
so only five of the edit points can be registered.

When a VTR not equipped with the split

editing function is used as the player

When a VTR for which the video and audio edit
points cannot be set independently is used as the
player, split editing is still possible by setting the
audio IN point and OUT point in the recorder and
setting the data of three points as the video edit
points.

<Note>
If, during audio split editing, the video OUT point (or
audio OUT point) only is registered without the
audio OUT (or video OUT point) having been
registered and automatic editing is then executed,
editing will continue until either the audio OUT point
(or video OUT point) is registered or the STOP
button is pressed to suspend the editing operation.

Advertising