Panasonic HD1700pe - Manual (Page 94)

94
Setup menus
The underlining (__) denotes the factory setting mode.
<VIDEO> (continued)
No./Item Description of setting No./Item Description of setting
627
D/C ENH V
For accentuating the vertical contours during
down-conversion and line conversion
(1080i
< <> > 720p).
0000 0dB
0001 i 0.7dB
0002 i i 1dB
0003 i 1.2dB
0004 i 1.5dB
0005 i 2dB
628* 5
U/C ENH H
For accentuating the horizontal contours
during up-conversion.
0000 0dB
0001 i 0.7dB
0002 i i 1dB
0003 i 1.2dB
0004 i 1.5dB
0005 i 2dB
629* 5
U/C ENH V
For accentuating the vertical contours during
up-conversion.
0000 0dB
0001 i 0.7dB
0002 i i 1dB
0003 i 1.2dB
0004 i 1.5dB
0005 i 2dB
630* 2
1080i > >HD_
OUT
For selecting the HD output signal format
during 1080i tape playback or in the 1080i EE
mode. (See table below.)
0000 1080i
0001 720p
0002 1080i
631* 2
1080i > >SD_
OUT
For selecting the SD output signal format
during 1080i tape playback or in the 1080i EE
mode. (See table below.)
0000 480i
0001 --------
0002 480p
0000 1080i
(no conversion) 480i (down-
converted output) 480i (down-
converted output)
720p (line-
converted output) 480i (down-
converted output) 480i (down-
converted output)
1080i
(no conversion) 480p* (down-
converted output) 480i (down-
converted output)
0001
0002
HD SDI OUT SD SDI OUT
Output connectors
VIDEO OUT
632* 2
720p > >HD_
OUT
For selecting the HD output signal format
during 720p tape playback or in the 720p EE
mode. (See table below.)
0000 1080i
0001 720p
0002 720p
634* 2
480p > >HD_
OUT
For selecting the HD output signal format
during 480p tape (DVCPRO50P) playback.
(See table below.)
0000 1080i
0001 720p
0002 ---------
635* 2
480p > >SD_
OUT
For selecting the SD output signal format
during 480p tape (DVCPRO50P) playback.
(See table below.)
0000 480p
0001 480p
0002 480i
633* 2
720p > >SD_
OUT
For selecting the SD output signal format
during 720p tape playback or in the 720p EE
mode. (See table below.)
0000 --------
0001 480i
0002 480p
0000 1080i (line-
converted output) 480i (down-
converted output) 480i (down-
converted output)
720p
(no conversion) 480i (down-
converted output) 480i (down-
converted output)
720p
(no conversion) 480p* (down-
converted output) 480i (down-
converted output)
0001
0002
HD SDI OUT SD SDI OUT
Output connectors
VIDEO OUT
0000 1080i (up-
converted output) 480p*
(no conversion) 480i (down-
converted output)
720p (up-
converted output) 480p*
(no conversion) 480i (down-
converted output)
Muted 480i (down-
converted output) 480i (down-
converted output)
0001
0002
<Note>
During SD tape playback, the VTR cannot be operated in the 60
Hz mode.
HD SDI OUT SD SDI OUT
Output connectors
VIDEO OUT
<Note>
The numbers on the superimposed
display are approximations only.
<Note>
The numbers on the superimposed
display are approximations only.
<Note>
There is no output in the 60 Hz
mode.
<Note>
The numbers on the superimposed
display are approximations only.
*1: This item is not displayed when the 23/24 Hz, 25 Hz (HD or SD)
or 50 Hz mode has been selected as the system menu item
No.25 (SYSTEM FREQ) setting.
*2: This item is not displayed when the 25 Hz (HD or SD) mode has
been selected as the system menu item No.25 (SYSTEM FREQ)
setting.
* Setup menu item No.107 and INPUT CHECK do not function,
and the same signal as this signal line is output.
<Note>
There is no output in the 60 Hz
mode.