Paradyne 7612 SNMP DSU - Manual (Page 114)

Cables and Pin Assignments
E-6 7612-A2-GB20-10 November 1997
10BaseT Connector
Use a standard 10BaseT cable to connect the DSU to an Ethernet LAN. A cable
is provided with the DSU.
The following table defines the pinouts for the 10BaseT port. It is an 8-pin,
unkeyed jack.
Use Pin #
Transmitted Data + 1
Transmitted Data – 2
Received Data + 3
NC 4
NC 5
Received Data – 6
NC 7
NC 8
NC = Not connected (unused).
Modular RJ48S DDS Network Interface Connector
Network access is via a modular cable with an RJ48S keyed plug connector on
each end.
Use Circuit Pin #
Transmitted data to the local loop R 1
Transmitted data to the local loop T 2
NC – 3
NC – 4
NC – 5
NC – 6
Received data from the local loop T1 7
Received data from the local loop R1 8
NC = Not connected (unused).