Paradyne 7612 SNMP DSU - Manual (Page 125)

Index
IN-4 7612-A2-GB20-10 November 1997
R
rear panel, connections, 1-4
Refresh command, 6-6
reset device, 7-8
RFC 1213, object groups supported, C-1
RFC 1573, object groups supported, C-1
RFC 1643, object groups supported, C-17
RFC 1659, object groups supported, C-13
RIP option, 5-1
RJ48S network interface cable, E-6
RLSD Control, A-8
router, management data, 5-3
RS–232–Like MIB
Asynchronous Port Table Objects, C-14
General Port Table Objects, C-13
Input Signal Table Objects, C-16
Number of RS–232–Like Ports, C-13
objects supported, C-13
Output Signal Table Objects, C-17
Synchronous Port Table Objects, C-15
RTS
action, A-8
request to send LED, 6-5
RXD, received data LED, 6-5
S
safety instructions. See Startup Instructions
saving option changes, 3-6
screens, for user interface, 2-1
security, 4-1
self-test results, 6-8
session, Telnet access, 4-1
SNMP
Community Name, A-14
number of managers, A-15
number of trap managers, A-17
security, A-15
system entries, 3-1
trap types generated, A-18
traps, 8-1, A-17, D-1
SNMP management
general, 1-4
limiting access, 4-6
options, A-14
startup, ATI, 2-1
startup instructions. See Startup Instructions
statistics
Management Protocol, 6-13
Network Performance, 6-11
status
DSU, 6-6
menu, 2-2
network interface, 6-10
test messages, 6-9
subnet, IP addresses, 5-1
system
device name fields, 3-1
LEDs, 6-3
T
technical specifications, F-1
Telnet session
access, 4-1
access level, A-13
Disconnect Time, A-13
options, A-12
timeout, A-13
to initiate ATI, 2-1
Terminal port
access level, A-11
character length, A-10
data rate, A-10
direct connection, 2-1
login, A-11
options, A-10
parity, A-11
reset, 7-8
stop bits, A-11
terminal port, access, 4-1
test
DTE, 7-5
LED, 6-3
menu, 2-2
network, 7-3
status messages, 6-9
Test Duration, A-4
Test Timeout, A-4
testing, 7-1
timeout
Telnet session inactivity, A-13
Terminal port inactivity, A-12