Paradyne 7612 SNMP DSU - Manual (Page 92)

MIB Descriptions
C-6 7612-A2-GB20-10 November 1997
Table C-2. Interfaces Group Objects (4 of 4)
Object Setting/Contents Description
ifOutOctets
(ifEntry 16) Collects output
statistics on data
received by the An integer number.
ifOutUcastPkts
(ifEntry 17)
received by the
interface.
Applies to the IMC and
ifOutDiscards
(ifEntry 19)
Applies to the IMC and
the Ethernet port.
Statistics are not
collected if the
ifOutErrors
(ifEntry 20)
collected if the
Ethernet port is
disabled.
Extension to Interface Table (ifXTable)
This extension contains additional objects for the Interface table. Table C-3 shows
the objects supported.
Table C-3. Extension to Interface Table (ifXTable)
Object Description Setting/Contents
ifName
(ifXEntry 1) Provides name of the
interface. Interface text strings:
H Ethernet Port
H Terminal Port
H DDS Network
H User Data Port
H In-band Management Channel
ifLinkUpDown-
TrapEnable
(ifXEntry 14) Indicates whether the link is
up or down, or enterprise-
specific traps should be
generated. Only supports DDS network and User
data port.
SNMP Traps must be enabled for the
unit. See Table A-9,
SNMP Traps
Options .
ifHighSpeed
(ifXEntry 15) Reflects the ifSpeed setting
for the interface. This object is supported as read-only.
ifConnector-
Present
(ifXEntry 17) Indicates whether there is a
physical connector for the
interface. true(1) – Will always have this value for
the DDS network, Ethernet port,
Terminal port, and User Data port.
false(2) –Will always have this value for
the In-band Management Channel.