Paradyne 7612 SNMP DSU - Manual (Page 124)

Index
IN-3 7612-A2-GB20-10 November 1997
login ID, 4-1
loopback
bilateral, A-7
DTE–initiated, A-7
network–initiated, A-5
V.54–initiated, A-5
loopbacks, 7-3
M
main menu
configuration options, A-1
tree structure, 2-2
management, of SNMP DSU, 1-1
Management Protocol Statistics, 6-13
messages
alarm and device, 8-1
health and status, 6-6
self-test results, 6-8
test status, 6-9
MIB
descriptions, C-1
Enterprise MIB objects supported, C-17
Ethernet–Like MIB objects supported, C-17
general support, 1-4
MIB II objects not supported, C-2
MIB II objects supported, C-1
RS–232–Like MIB object groups supported, C-13
MIB II
Extension to Interface Table, C-6
Generic Receive Address Table, C-9
ICMP Group, C-12
Interface Stack Group, C-7
Interface Test Table, C-8
Interfaces Group, C-3
IP Group, C-10
SNMP Group, C-12
SNMP traps, D-2
System Group, C-2
TCP Group, C-12
Transmission Group, C-12
UDP Group, C-12
Monitor DTR, A-11
N
navigating the screens, 2-5
network
interface cable, E-6
interface LEDs, 6-4
interface options, A-5
interface status, 6-10
loopbacks, 7-3
performance statistics, 6-11
tests, 7-3
NMS
IP validation, A-15
SNMP access, 4-6
SNMP connectivity, 5-1
SNMP security options, A-15
NS, no signal LED, 6-4
null modem cable, E-5
O
objects for MIBs, C-1
OK, LED, 6-3
OOF, out of frame LED, 6-4
OOS, out of service LED, 6-4
operating mode, A-2
options
configuration areas, 3-4
configuration tables, A-1
configuration worksheets, B-1
P
package checklist. See Startup Instructions
performance, network statistics, 6-11
pin assignments, E-1
port
access, 4-1
LEDs, 6-5