Panasonic WJ-HD220 - Manual (Page 25)

25
■ Main Menu (WJ-HD220 MAIN
MENU)
The main menu is located at the top of the menu tree from
where every menu window starts.
1. Hold down the [SETUP/ESC] button for 2 seconds. The
main menu appears.
2. Select a setup menu you wish to program using the [D]
or [C] button, and press the [SET] (JogDial).
The selected setup menu opens. The following pages
will detail each setup menu.
■ Timer Recording Setup (TIMER
REC)
This menu assigns a timer to start recording by use of an
external timer or the internal timer. When the internal timer
(INT) is set, there are four programs assignable to the
weekly and/or daily schedule. Each program can contain
up to four events along with start and end time, and record-
ing-mode. Alarm recording will be carried out when an
alarm operates within the scheduled time zone.
When the external timer (EXT) is set and the connected
timer switch turns on to supply power, the recorder will start
power-on recording.
1. Select a timer mode using the JogDial.
OFF: Does not use any timer, and manual recording is
available.
INT: Carries out internal timer recording according to
the program.
EXT: Carries out power-on recording.
2. Press the JogDial to validate the selection. When INT is
selected, the TIMER REC menu opens.
3. Move the cursor to the desired line using the [D] or
[C] button.
4. Select any parameter from PROG1 to PROG4 using the
JogDial, and press the JogDial. The PROG1-4 SETUP
menu opens.
● Program "1-4" Setup (PROG1-4
SETUP)
1. Select the event number with the [D] or [C] button,
and press the JogDial. The cursor moves to the START
position.
After this operation, the [D] and [C] buttons move the
cursor to the right and left.
2. Select a start time (START) using the JogDIal, and
press the [D] button to move to the next position.
Available START times: From 0:00 to 23:59 in the 24-
hour system.
3. Select an end time (END) in the same way as above
and press the [D] button to move the cursor to the
MODE position.
Available END times: From 0:00 to 24:00 in the 24-
hour system.
Notes: There are some restrictions on programming.
• An event, except the first event (NO 1), can be pro-
grammed only if the immediately preceding event
has been set up.
• The start time should be later than the end time of
the immediately preceding event.
• The end time should be later than the start time of
the event.
• An end time set at 24:00 will cancel all following
events.
• When you set both the start and end time of an
event to the same hour, the event will not be record-
ed.
• When planning to record all day long, set the start
time to 00:00 and the end time to 24:00 for the final
event.
• When planning to record through midnight:
Set 24:00 for the end time of the final event of the
day.
WJ-HD220 MAIN MENU
TIMER OFF
REC SETUP
O
EXT REC SETUP
O
DISPLAY SETUP
O
SYSTEM SETUP
O
ALARM SETUP
O
COMMUNICATION SETUP
O
SWITCHER SETUP
O
SYSTEM INFORMATION
O
LANGUAGE ENGLISH
PROG1 SETUP
NO. START END MODE
1
→ 8:00 12:20 SETO
2
→ 13:00 15:00 SETO
3
→ : :
4
→ : :
TIMER REC
PROGRAM
SUNDAY PROG1
O
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
DAILY