Panasonic WJ-HD220 - Manual (Page 60)

60
● Program Assignment (TIMER REC)
When internal timer (INT) is selected, programs can be
assigned on a weekly and/or daily basis.
Assignable programs: PROG1 – PROG4, OFF
● Programming (PROGRAM SETUP)
There are four programs, each containing four events hav-
ing a start and end time, and a recording mode.
1. Select ON or OFF for each event.
ON: Applies the schedule and mode to the program.
OFF: Does not apply.
2. Enter the start and end times.
Assignable START times: From 00:00 to 23:59
Assignable END times: From 00:00 to 24:00
3. Click the SET button.
4. Click the mode SETUP button. The PROG1-4 No.1-4
window opens.
● Recording Mode Setup (PROG1-4
NO.1-4 SETUP)
Parameters for internal timer recording are assigned to
each event (NO.1-4) of the program (PROG1-4) in this win-
dow. There are five recording modes available: super fine
(SF), fine (FQ), normal (NQ), long-time (EX) and optional
(SP). If combined with audio recording (-A), the number of
recording modes doubles. The selected recording mode
determines the remaining recording time displayed on the
monitor.
In the SP mode, the field rate and picture quality are vari-
able, and can be selected at option in the range of 0.1 to
30 FPS with five quality level options respectively. After the
recording mode is selected, the available recording time is
determined and displayed.
N/A
Rec Mode Quality Audio Record Note
SF-xxxH Super Fine N/A
Field rate, quality
selected optionally
Field rate, quality
selected optionally
N/A
N/A
N/A
Available
Available
Available
Available
Fine
Normal
Long time
Optional setup
Super Fine
Fine
Normal
Long time
FQ-xxxH
NQ-xxxH
EX-xxxH
SP-xxxH
Available Optional setup SP-AxxxH
SF-AxxxH
FQ-AxxxH
NQ-AxxxH
EX-AxxxH
Notes:
• By selecting a recording time, the recording rate (REC
RATE) and the recording quality (REC QUALITY) will be
automatically calculated and displayed. For details,
refer to the provided booklet "REC MODE TABLES for
WJ-HD220".