Panasonic WJ-HD220 - Manual (Page 63)

63
TYPE2 12H: Time and date are displayed in two lines in
the AM-PM system.
OFF: Time & date display is disabled.
8 Time and Date Position (TIME&DATE POSITION)
Right-Lower: Displays time & date in the lower right
corner.
Right-Upper: Displays time & date in the upper right
corner.
Left-Lower: Displays time & date in the lower left cor-
ner.
Left-Upper: Displays time & date in the upper left cor-
ner.
8 Time & Date Embedded (TIME&DATE
EMBEDDED)
ON: The display will be embedded and recorded with
the image data.
OFF: The display will not be recorded.
8 Status Display (STATUS DISPLAY)
ON: Status display is enabled.
OFF: Status display is disabled.
8 Status Display Position (STATUS POSITION)
Right-Lower: Displays status in the lower right corner.
Right-Upper: Displays status in the upper right corner.
Left-Lower: Displays status in the lower left corner.
Left-Upper: Displays status in the upper left corner.
8 HDD Full (HDD FULL)
1% - 99%: The FULL indicator blinks when the remain-
ing capacity reaches the selected value. This will
take effect when DISK END MODE is set to STOP in
the RECORD SETUP.
8 Remote LED (REMOTE LED)
ON: REMOTE LED turns on when the network controls
the recorder.
OFF: REMOTE LED is deactivated.
8 HDD Check (HDD CHECK)
ON 0:00 - 23:00: The recorder checks the HDD at the
specified time every day.
OFF: Check is deactivated.
Click the [SET] button when all items have been set proper-
ly.
Click the [CAMERA TITLE SETUP] button to open the CAM-
ERA TITLE window.
■ Externally Specified Recording
Mode (EXT REC SETUP)
This window specifies the recording mode and parameters
that will be changed when the switch externally connected
to the EXT REC terminal is turned on.
Refer to ● Recording Mode Setup PROG1-4 SETUP, NO. 1-
4, for operating procedures and available parameters.
■ Display Setup (DISPLAY SETUP)
Time and date display and other displays of status informa-
tion are specified in this window.
8 Clock Setup (CLOCK SETUP)
Select a month, and type a day, year, hour, and minute.
8 Time and Date Display (TIME&DATE DISPLAY)
TYPE1 24H: Time and date are displayed in one line in
the 24-hour system.
TYPE1 12H: Time and date are displayed in one line in
the AM-PM system.
TYPE2 24H: Time and date are displayed in two lines in
the 24-hour system.