Panasonic WJ-HD220 - Manual (Page 98)

98
5. Select YES or NO rotating the JogDial, and press the
JogDial.
YES: Carries out formatting. Wait until the process
ends.
When YES is selected, the display will turn to NOW
FORMATTING. It will change to HDD FORMAT
→ SET
DONE when formatting is completed.
When the [STOP] button is pressed, the window returns
to that of step 1.
Select RESTART to return to normal operation.
8 Restarting (RESTART)
This command closes the DISK MENU, and returns to
normal operation.
1. Display the DISK MENU.
2. Move the cursor to RESTART.
3. Press the JogDial.
4. Rotate the JogDial to select a restarting parameter.
YES: Escapes from the DISK MENU, and enters normal
operation.
PLAY ONLY: Enters a special mode that prohibits
recording, but allows playback.
NOW FORMATTING
DISK MENU
NO.1:XXX.XXGB
NO.2:XXX.XXGB
REMOVE LINK SET
→
HDD FORMAT SET
→
RESTART SET
→
RESTART SET
→
RESTART NO
HDD FORMAT
SET DONE!
Notes:
• The PLAY ONLY mode can be utilized when you
verify a transplanted HDD removed from another
disk recorder that malfunctioned.
• In normal operation after selecting the PLAY ONLY
mode, "STOP (PO)" appears in the status display
while camera pictures are displayed, but not in
playback. "PO" stands for PLAY ONLY.
5. Press the JogDial to execute the selection, or press the
[STOP] button to return to the above step 1.
A message "SET DONE!" appears, and the recorder
restarts.
Notes:
• Follow the procedures described above when the DISK
MENU appears again after restarting. This happens
when the settings have been changed.
• To cancel the PLAY ONLY mode, follow these proce-
dures described above and select YES for RESTART.
RESTART
SET DONE