Panasonic WJ-HD220 - Manual (Page 32)

32
● Password Lock Setup (PASSWORD
LOCK)
A five-digit password is entered to protect all settings,
recorded pictures, and operating status against erroneous
operation and tampering. Settings alone can be also pro-
tected from unauthorized access. While the LOCK indicator
on the front panel is on, a message "NOW KEY LOCKED!"
is displayed to warn unauthorized operators. If accessed in
this condition, the buzzer beeps.
1. Move the cursor to PASSWORD LOCK with the [D] or
[C] button.
2. Select either ON or OFF with the JogDial, and press the
JogDial.
The default is OFF.
ON: The buttons are password protected. The recorder
enters the button lock mode if neither a button nor
the JogDial is operated within a period of five min-
utes.
OFF: No password protection is applied.
3. Move the cursor to ALL → or OPERATION→ with the
[D] or [C] button.
ALL: Allows both normal operations and setup opera-
tions.
OPERATION: Allows only normal operations. Setup
operations are not allowed.
4. Press the JogDial.
The preset password appears.
The default is "12345" for both ALL and OPERATION.
<New password setting>
5. Select a digit, rotating the JogDial.
6. Enter a number with the numeric button, and press the
JogDial.
The cursor moves one digit to the right.
7. Repeat steps 5 and 6 until all digits are entered.
8. Press the [SETUP/ESC] button to confirm the entered
password.
Go back to step 3 if you have not yet set the OPERA-
TION password.
● Keylock Buzzer Setup (KEYLOCK
BUZZ)
1. Move the cursor to KEYLOCK BUZZ with the [D] or [C]
button.
2. Select either ON or OFF with the JogDial, and press the
JogDial.
The default is ON.
ON: Buzzer beeps when unauthorized access takes
place.
OFF: Buzzer does not sound.
● Skip Alarm Recall Setup
(SKIP ALARM RECALL)
Alarm log pages are recalled on the monitor when the
JogDial is pressed for 2 seconds. When searching in the
log, you may need to skip pages. The page will skip the
specified number forward or backward from the displayed
page when rotating the JogDial.
1. Move the cursor to SKIP ALM RECALL with the [D] or
[C] button, and press the JogDial.
2. Select the number of skip pages with the JogDial, and
press the JogDial.
The default is 1 page.
Available skip pages: 1, 5, 10, 20, 50 pages
SYSTEM SETUP (1 OF 2)
PASSWORD LOCK OFF
ALL
→ *****
OPERATION
→ *****
KEYLOCK BUZZ ON
SKIP ALM-RECALL 1PAGE
SIMUL REC&PLAY ON
ALTER DETECT OFF
DISK END MODE CONTINUE
DISK END BUZZ ON
SYSTEM SETUP (1 OF 2)
PASSWORD LOCK OFF
ALL
→ *****
OPERATION
→ *****
KEYLOCK BUZZ ON
SKIP ALM-RECALL 1PAGE
SIMUL REC&PLAY ON
ALTER DETECT OFF
DISK END MODE CONTINUE
DISK END BUZZ ON
OPERATE
ALARM
SUSPEND
RESET OSD
TIMER DST
REMOTE
LOCK SE
SYSTEM SETUP (1 OF 2)
PASSWORD LOCK OFF
ALL
→ *****
OPERATION
→ *****
KEYLOCK BUZZ ON
SKIP ALM-RECALL 1PAGE
SIMUL REC&PLAY ON
ALTER DETECT OFF
DISK END MODE CONTINUE
DISK END BUZZ ON