Philips WV-NM100 - Manual (Page 21)

21
The "Local Area Connection Properties" window appears.
If the "Internet Protocol (TCP/IP)" item is not displayed, refer to
the operating instructions of the OS and follow the procedures
to install the TCP/IP.
The "Internet Protocol (TCP/IP) Properties" window appears.
Screenshot 4
Note
Screenshot 3
Click to select "Internet Protocol (TCP/IP)", and
then click the [Properties] button.
STEP3
Click the "Use the following IP address" radio
button and enter the IP address and the subnet
mask as follows.
• IP address: 192.168.0.9
• Subnet mask:
255.255.255.0
Click the [OK] button, and the window closes.
STEP5
STEP4