Philips WV-NM100 - Manual (Page 40)

40
BROWSING PICTURES
How to Operate
Monitor the picture of the camera in a preset position.
First, select whether a still picture or a motion picture is to be monitored in a preset position on the "Basic setup"
page. Refer to page 24 and 25 to display the "Basic setup" page.
Begin the operation from the "Basic setup" page.
The "Control" page appears.
(This screenshot is displayed when you choose a still picture to
be monitored in a preset position.)
The picture of the camera in the selected preset position
appears.
Screenshot 3
Screenshot 2
Screenshot 1
Select whether a still picture or a motion picture
is to be monitored in a preset position.
Refer to page 32 to monitor a still picture, and
page 34 to monitor a motion picture.
After the setting has been completed, click the
[Control] button.
STEP2
STEP1
Click the desired preset name from the list of
"Preset".
STEP3
• You can also operate the camera and adjust
the picture. For further information, refer to
page 33.
• To register more preset positions or change
a registered preset position, click "Preset
Setup". The "Preset registration" area
appears below the list of "Preset" and you
can register or change preset positions.
Notes