Philips WV-NM100 - Manual (Page 51)

51
Transferring Pictures to the Server at Designated Intervals
Set the interval time to transfer pictures to the server at designated intervals.
The setting can be made on the "FTP client" page of "Alarm&Transmission". Refer to page 49 and 50 to display the
"FTP client" page of "Alarm&Transmission".
Set the items for "Non alarm transmission
setup".
"Non alarm transmission"
Check "ON".
You can select "ON" or "OFF" to set whether to
transfer the picture at designated intervals or
not.
"Directory"
Enter the directory where the pictures should be
stored.
"File name"
Enter the file name of the picture to be trans-
ferred.
"Fix": The file name of the picture to be
transferred is the name designated
in "File name".
"Date & Time":
The file name of the picture to be
transferred will be "File name +
sequential number + month / day /
hours / minutes / seconds / year".
The sequential number will be given starting
from 1 automatically.
The total number of characters of the directory
name and the file name should not exceed
255 characters.
"Transmission interval"
In case "ON" is selected for "Non alarm trans-
mission", enter a number within the range below
for the transmission interval.
0.2 second to 1,440 minutes
Click the [SET] button after completing the set-
ting.
STEP2
! Important
STEP1