Philips WV-NM100 - Manual (Page 31)

31
The time on the browser will be displayed as hours
and minutes (00:00), though you can set hours, min-
utes and seconds in "Time setup".
! Important
Click the [Setup] button.
The login window will appear when you press
one of the buttons ([Camera Control], [Alarm
Log List], [Setup]) on the "Top Menu" page for
the first time. The default settings for user
name and password are as follows.
User name: admin
Password:
password
Change the default password for security.
! Important
STEP3
The "Top Menu" page appears.
The "Basic setup" page appears.
Screenshot 4
Screenshot 3
Set up the items on the "Basic setup" page.
This explanation is only for "Camera setup".
"Camera name"
Enter a name for the camera. The entered cam-
era name will be displayed when the reload but-
ton of the browser is pressed or when the
browser starts up the next time.
Characters for "Camera name": Up to 32 char-
acters
"Time setup (year-month-day hour:min:sec)"
Set the date and the time.
Year:
Enter 4 digits.
Month and day: Enter 2 digits each.
Hour, minute and second:
Enter 2 digits each, and
divide by colon (:).
"Power/Link/Access LED"
Click the "ON" radio button to use the LED as
status display.
Click the "OFF" radio button to turn off the LED
all the time.
"Camera position"
Select "Desk top" or "Wall mount" according to
where the camera is installed.
Click the [SET] button after completing the set-
ting.
STEP5
STEP4