Philips WV-NM100 - Manual (Page 49)

49
TRANSFERRING PICTURES TO THE SERVER
Transfer the pictures stored in the camera to the server. The transfer to the server can be made in the two following
ways:
• Transfer pictures when an alarm occurred in the motion detection area.
• Transfer pictures at designated intervals.
To transfer the pictures to the server, the settings are required in advance.
Only still pictures can be transferred to the server. Transferring motion picture to the server is not possible.
Preparations for Transferring Pictures to the Server
Set the FTP settings to transfer pictures to the server. The settings can be made on the "FTP client" page of
"Alarm&Transmission".
! Important
Begin the operation from the "Basic setup" page.
Refer to page 24 and 25 to display the "Basic setup" page.
The "Operation mode" page of "Advanced setup" appears.
Screenshot 2
Screenshot 1
Click the [Advanced setup] button.
STEP1
Click the [Alarm&Transmission] button.
STEP2