Philips WV-NM100 - Manual (Page 58)

58
ADVANCED SETTINGS
Settings for the Host Authentication
Begin the setting for the host authentication.
You can set a double authentication for the operation of the camera.
One is the host authentication and the other is the user authentication.
The host authentication checks if an IP address of a PC accessing the camera is registered as a host or not.
Up to eight PCs can be registered for the host authentication.
The setting of the host authentication is made on the "Host authentication" page.
Begin the operation from the "Basic setup" page.
Refer to page 24 and 25 to display the "Basic setup" page.
The "Operation mode" page of "Advanced setup" appears.
Screenshot 2
Screenshot 1
Click the [Advanced setup] button.
STEP1
Click the [Authentication] button.
STEP2