Panasonic SX-KN7000 - Manual (Page 106)

VELOCITY CHANGE
Modify the recorded velocity in specific measures
of specific tracks.
1. Use the TRACK
∧
and
∨
buttons to select the
track you wish to edit.
• You cannot select the track for the CONTROL,
RHYTHM or CHORD part.
• If ALL is selected, all tracks will be edited.
2. Use the FIRST MEASURE
∧
and
∨
buttons
to specify the start point (measure number) of
the velocity change.
3. Use the LAST MEASURE
∧
and
∨
buttons to
specify the end point (measure number) of the
velocity change.
4. Use the VELOCITY
∧
and
∨
buttons to specify
the change in velocity.
• The value you select will be added to or de-
leted from the current velocity.
5. Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
TRANSPOSE
Change of key of specific measures of specific
tracks.
1. Use the TRACK
∧
and
∨
buttons to select the
track you wish to edit.
• You cannot select the track for the CONTROL,
RHYTHM or CHORD part.
• If ALL is selected, all tracks will be edited.
2. Use the FIRST MEASURE
∧
and
∨
buttons
to specify the start point (measure number) of
the transpose.
3. Use the LAST MEASURE
∧
and
∨
buttons to
specify the end point (measure number) of the
transpose.
4. Use the TRANSPOSE
∧
and
∨
buttons to
specify the change in pitch.
• Increments are in semitones. A value of 12 is
one octave. A – value lowers the pitch, and a
+ value raises it.
5. Press the OK button.
• The confirmation display appears. Press the
YES button to execute the function, or press
the NO button to cancel the function.
Se
q
u
e
n
c
e
r
Part IV Sequencer
106
QQTG0671