Panasonic SX-KN7000 - Manual (Page 137)

How to use the Style Convert Disk
Style data from commercial manufacturers can be loaded into the COMPOSER and used by this
instrument.
1. Turn on the DISK button.
2. On the DISK MENU display, select STYLE
CONVERT.
3. Insert the “STYLE CONVERT DISK” that was
included with this instrument into the Disk
Drive slot.
• The display changes to the STYLE TYPE
SELECT display.
4. Select the style type.
5. Press the OK button.
6. Follow the instructions on the display to per-
form the desired operation.
• The operation differs depending on the type
of disk.
• For Technics type data, all of the MEMORY
contents of the COMPOSER are overwritten,
and in some cases, the SOUND MEMORY
contents are also overwritten.
• Style data that requires a lot of data space
may not be loaded.
• Depending on the style, volume balance and
tone nuances in each part of the pattern may
not be played back as in the original data
because of the difference in sound source
waveform. Also, special effects and tones in-
cluding edited tones may not be played back
correctly.
• It is possible to play back patterns of more
than 16 measures, but they are not recorded
or edited correctly.
• When style data differs for the INTRO, FILL
IN and VARIATION time signatures, the
INTRO, FILL IN and ENDING may not be
played back correctly.
• Depending on the manufacturer, the number
of styles written on the disk label may differ
from the actual number of styles included on
the disk.
About the Initial Data Disk
Use INITIAL DATA DISK to reset the CUSTOM STYLE and other data to the factory preset settings.
• The disk contains the following data. Specify
which file you wish to load.
CTMINI CUSTOM STYLE initial data
UMDINI USER MIDI SETTING initial data
FAVINI FAVORITES SETTING initial data
HPGINI HOME PAGE SETTING initial data
• Be careful not to accidentally delete a file.
DISK
LOAD
DISK
IN USE
Di
sk Dr
iv
e
Part VI Disk Drive
137
QQTG0671