Panasonic SX-KN7000 - Manual (Page 156)

<PAGE 4>
FILTER RESONANCE:
Use the RESONANCE
∧
and
∨
buttons to adjust
the amount of resonance (0 to 127).
BRIGHTNESS:
Use the BRIGHTNESS
∧
and
∨
buttons to adjust
the brightness of the sound (0 to 127).
ATTACK TIME:
Use the ATTACK
∧
and
∨
buttons to specify the
attack time (0 to 127).
DECAY TIME:
Use the DECAY
∧
and
∨
buttons to specify the
decay time (0 to 127).
RELEASE TIME:
Use the RELEASE
∧
and
∨
buttons to specify
the release time (0 to 127).
VIBRATO RATE:
Use the RATE
∧
and
∨
buttons to specify the
vibrato speed (0 to 127).
VIBRATO DEPTH:
Use the DEPTH
∧
and
∨
buttons to specify the
vibrato depth (0 to 127).
VIBRATO DELAY:
Use the DELAY
∧
and
∨
buttons to specify the
time interval from when the keys are played until
the vibrato starts (0 to 127).
• The center value is 64 (±0).
<PAGE 5>
MONO/POLY MODE:
Use the MONO/POLY MODE
∧
and
∨
buttons
to select the output mode.
PORTAMENTO:
Use the PORTAMENTO ON/OFF buttons to
enable or disable the portamento function. (Por-
tamento is a continuous gliding movement from
one tone to another.)
Use the
∧
and
∨
buttons to specify the porta-
mento time.
• PORTAMENTO does not function for the
POLY MODE.
MODULATION SENSITIVITY:
Use the MODULATION SENS
∧
and
∨
buttons
to adjust the sensitivity of the MODULATION
wheel.
• Use the MSB
∧
and
∨
buttons (half-tone in-
crements) and the LSB
∧
and
∨
buttons to
adjust the setting.
So
u
n
d
Part VIII Sound
156
QQTG0671