Panasonic SX-KN7000 - Manual (Page 76)

RECORD & EDIT
These functions are recording and editing
operations used for creating a new perform-
ance.
REALTIME RECORD (page 80)
Record each part of your performance just
as you play it on the keyboard.
PUNCH RECORD (page 86)
Correct a selected portion of your re-
corded performance.
STEP RECORD (page 88)
Store the sounds note-by-note on the dis-
play.
• You can also store the chord or rhythm pro-
gression for the AUTO PLAY CHORD.
TRACK ASSIGN (page 95)
Assign parts to tracks.
QUANTIZE (page 96)
Correct the timing of your performance.
SONG SELECT (page 86)
Select a song.
SONG CLEAR (page 97)
Erase all the recorded data of a song.
TRACK CLEAR (page 97)
Erase the contents of a specific track.
NOTE EDIT (page 98)
Store and correct performance (NOTE)
data on a piano roll display.
DRUM EDIT (page 99)
Store and correct DRUMS part data on a
special display.
AFTER TOUCH SETTING (page 100)
Specify whether or not keyboard after
touch is recorded as data.
COPY & PASTE
Copy recording data and paste it to the desired
location.
TRACK COPY (page 101)
Copy data of specific tracks.
SONG COPY (page 101)
Copy data of specific songs.
TRACK MERGE (page 102)
Merge the recorded contents of two tracks
and store in a third track.
TRACK CLEAR (page 97)
Erase the contents of a specific track.
SONG CLEAR (page 97)
Erase all the recorded data of a song.
MEASURE COPY (page 102)
Copy the contents of specific measures.
MEASURE ERASE (page 103)
Erase the contents of specific measures.
MEASURE DELETE (page 103)
Delete specific measures from the perform-
ance.
MEASURE INSERT (page 104)
Insert additional measures in the perform-
ance.
APC TO SMF CONVERT (page 104)
Save automatic accompaniment patterns
and pad performance data in a Standard
MIDI File (SMF).
RANGE EDIT
Change the note position etc. in the recorded
data.
QUANTIZE (page 96)
Correct the timing of your performance.
NOTE CHANGE (page 105)
Change the pitch of specific notes.
VELOCITY CHANGE (page 106)
Modify the recorded velocity (how hard the
keyboard was played) of performance data.
TRANSPOSE (page 106)
Change the key of the performance data.
ADVANCE/DELAY (page 107)
Speed up or delay the sound production of
performance data.
Summary of the SEQUENCER menu items
The measure count on the display corresponds to the time signature of the selected rhythm. However,
if rhythm data is stored in the RHYTHM part and that part is played back, the measure count on the
display corresponds to the stored rhythm data. (Refer to page 94.)
• If you wish to use a time signature not available in the preset rhythms, use the COMPOSER to
create a new time signature. (Refer to page 110.)
About the measure count
Se
q
u
e
n
c
e
r
Part IV Sequencer
76
QQTG0671