Panasonic SX-KN7000 - Manual (Page 56)

Left Hold
This setting determines how the LEFT part
sounds when the LEFT button in the CONDUC-
TOR is on during a performance with the BASIC
or FINGERED mode.
1. Press the MODE button to turn it on.
• The display changes to the following.
2. Use the LEFT HOLD: ON/OFF button to set
the mode to on or off.
OFF:
The LEFT part sounds from the pressed chord
keys.
• When BASIC is selected, the LEFT part turns
off. The LEFT part sounds if you turn it on,
but <one-finger> chords cannot be specified.
ON:
Specifying <one-finger> chords in the BASIC
mode produces the full chords; otherwise the
LEFT part notes are those of the pressed
chord keys.
• When BASIC is selected the LEFT part turns
off, but it will sound if you turn it on.
• Touch response does not function for the
LEFT part.
• When the mode is set to ON, during a rhythm
performance, the LEFT part continues to play
even when the keys are released.
APC VOLUME
To adjust the volume balance between the auto-
matic accompaniment and the parts you play
manually on the keyboard, the volume of all the
automatic accompaniment parts (DRUMS, AC-
COMP, and BASS) can be lowered as one.
Use the APC/SEQUENCER VOLUME slide con-
trol to adjust the volume.
• Use this control to lower the automatic accom-
paniment volume when it is too loud relative
to your manual performance.
• At the MAX position, the volumes of the auto-
matic accompaniment parts correspond to
their current settings; at the OFF position, the
volume is 0. The volume should normally be
set to MAX.
• The set values are shown in the APC column
of the normal display. (Refer to page 29.)
• The volume can be adjusted for each part.
(Refer to page 29.)
• When the position of the slide control coin-
cides with the actual volume, the indicator is
lit. When the volume is changed by of the
PANEL MEMORY or SEQUENCER playback,
the actual volume differs from that indicated
by the position of the slide control. In this case,
the indicator is not lit.
• The volume of the PERFORMANCE PADS
part does not change.
• During SEQUENCER playback or disk
DIRECT PLAY, operation of this slide control
affects the total volume of all the playback
parts.
APC/SEQUENCER
VOLUME
MAX
MIN
P
la
y
in
g
t
h
e r
h
yt
h
m
Part II Playing the rhythm
56
QQTG0671