Panasonic SX-KN7000 - Manual (Page 195)

Storing user settings
After you change the MIDI settings, you can store
your customized settings in USER preset memo-
ries (3 USER memories).
1. Adjust the various MIDI settings.
2. Go to PAGE 4/4 of the MIDI PRESETS display.
• The display looks similar to the following.
3. Use the
▲ and ▼ buttons to select the memory
in which to store the settings (USER SETTING
1, 2, 3).
4. Use the WITH SPLIT POINT? button to specify
whether or not to also store the keyboard split
point (YES/NO).
5. Press the WRITE button.
Recalling the USER settings
1. Go to PAGE 3/4 of the MIDI PRESETS display.
2. Use the ▲ and ▼ buttons to select a number.
3. Press the OK button.
Program Change MIDI Out
Use this function to immediately transmit specific PROGRAM CHANGE and BANK SELECT data from
this display on a specified MIDI channel.
1. On the MIDI MENU display, select PROGRAM
CHANGE MIDI OUT.
• The display looks similar to the following.
2. Use the ▲ and ▼ buttons to select a function.
MIDI CHANNEL:
The MIDI channel to transmit to (1 to 16).
PROGRAM CHANGE:
Specify the PROGRAM CHANGE number to
transmit (1 to 128).
BANK SELECT MSB:
Specify the BANK SELECT MSB to transmit
(0 to 127).
BANK SELECT LSB:
Specify the BANK SELECT LSB to transmit
(OFF, 0 to 127).
• When set to OFF, neither the LSB nor the MSB
are transmitted.
3. Use the
∧
and
∨
buttons to change the setting.
4. Press the SEND button.
• The specified data is transmitted.
• The data is unconditionally transmitted regard-
less of the other settings.
MID
I
Part XIII MIDI
195
QQTG0671