Panasonic SX-KN7000 - Manual (Page 131)

SAVE
1. Insert a formatted disk into the Disk Drive slot.
Push it all the way in until you hear a click.
• A disk which is used with this instrument for
the first time must first be formatted.
2. On the DISK MENU display, select SAVE.
• The display looks similar to the following.
3. Select the type of data save you want.
TECHNICS FORMAT:
Save this instrument’s data in the Technics
File format.
SMF FORMAT 0:
Save the SEQUENCER data in the “Stand-
ard MIDI File” format (FORMAT 0).
TECHNICS FORMAT
1. Use the buttons below the display to specify
the file number you wish to save to.
• The types of data that can be saved are shown
in a frame on the right side of the display. If
you press the SAVE button, all the indicated
data is saved. Ordinarily PERFORMANCE
data is selected, but you can use the SAVE
OPTION to select specific data to save.
2. If you wish to assign a name to the file, press
the NAME button.
• The display looks similar to the following.
3. Use the buttons below the display to assign a
name.
• Press a button for the corresponding letter.
Press the SHIFT button to display numbers.
• Press the POSITION button to move the cur-
sor.
• You can also use the TEMPO/PROGRAM dial
to select the characters.
• Press the INS button to enter a space at the
cursor position.
• Press the DEL button to erase the character
at the cursor position.
• Press the CLR button to erase the entire
name.
• Press the →← button to center the name.
4. Press the OK button.
• The display returns to the SAVE display.
5. Press the SAVE button.
• The SAVE operation begins.
• If you attempt to save data to a file number in
which data is currently saved, the display
changes to the confirmation display. Press the
YES button to continue the SAVE procedure,
or press the NO button if you wish to cancel
it.
Di
sk Dr
iv
e
Part VI Disk Drive
131
QQTG0671