National Instruments 800 Series - Manual (Page 39)

© National Instruments Corporation 4-1 VXIpc 800 Series User Manual
Chapter
4
BIOS
This chapter contains information on BIOS, the low-level interface
between the hardware and PC software that configures and tests your
hardware at boot up. This BIOS (Basic Input Output System) provides
an easy-to-use graphical user interface to allow you to configure system
aspects according to your needs.
Entering BIOS Setup
To enter the BIOS setup program, perform the following steps.
1. Turn on or reboot the system. A screen appears with a series of
diagnostic checks.
2. When Hit <DEL> if you want to run SETUP appears,
press the <DEL> key to enter the BIOS setup program.
3. Choose options with the keyboard. Modify the settings to reflect
system options.