National Instruments 800 Series - Manual (Page 65)

Appendix D Front Panel and Connectors
VXIpc 800 Series User Manual D-14 © National Instruments Corporation
External SMBs
Figure D-9 shows the location and pinouts for the SMB connectors on
the VXIpc 800. The SMB connectors are used for an external clock
signal and TTL trigger input and output. Table D-8 gives the name and
description for the SMB connector signals. Also see Table D-9 for a
description of the signal characteristics for the SMB connections.
Amp manufactures an SMB mating connector, part number 1-413985-0.
Figure D-9. SMB Connectors Location and Pinout
Table D-8. SMB Connector Signals
Pin Signal Description
Center TTL Trigger or Clock Signal
Shield Ground
Center
SMB
Shield
2
1